Product ID:R-0805 FLUORIDE MASKING AGENT
MSDS Date:08/31/1988
FSC:6810
NIIN:00N021682
MSDS Number: BLRYH

Emergency Phone: 919-735-9222

Info Phone: 919-735-9222

Cage: 60358

Cage: 60358

1)

CAS: 13510-49-1

RTECS: DS4800000

Fraction By Weight: 1.2%

OSHA PEL 2 MG/M3 (BE)

ACGIH TLV: 0.002 MG/M3 (BE)

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES:CAN CAUSE IRRITATION. SKIN:CAN
CAUSE DERMATITIS. INHAL:INHALATION OF DRY MATERIAL CAN CAUSE
PNEUMONITIS.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:SKIN:RINSE THOROUGHLY W/SOAP & WATER. INHAL: GET MED HELP IN
CASE OF INHALATION OF DRY MATERIAL. EYES:FLUSH W/COPIOUS AMOUNTS OF
WATER FOR AT LEAST 15 MINUTES & GET MD. INGEST:CALL MD IMMEDIATELY.
GIV E LARGE AMOUNTS OF WATER. INDUCE VOMITING UNDER DIRECTION OF
MD.

Extinguishing Media:WATER, CO2, FOAM OR DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .

Spill Release Procedures:USE INERT ABSORBENT SUCH AS SAND OR
VERMICULITE & CONTAINERIZE FOR LATER DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:AVOID CONTACT WITH SKIN, EYES &
CLOTHING.
Other Precautions:IN CASE OF EVAPORATION AVOID CONTACT WITH OR
BREATHING OF DUST.

Respiratory Protection:NOT REQUIRED FOR LIQUID MATERIAL. USE NIOSH/MSHA
APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Protective Gloves:RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:LAB COAT.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:C3
Boiling Pt:B.P. Text:212F,100C
Vapor Pres:17 MM HG
Vapor Density:0.6
Spec Gravity:1.0
pH:3
Solubility in Water:COMPLETE
Appearance and Odor:COLORLESS, ODORLESS WATERLIKE LIQUID.

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:EVAPORATION.
Hazardous Decomposition Products:WHEN HEATED TO DRYNESS &
DECOMPOSITION, EMITS TOXIC OXIDES OF BERYLLIUM & SULFUR.

Waste Disposal Methods:DISPOSE OF I/A/W LOCAL, STATE & FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.